ABB ACS880 - Page 321

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
-1500.00; -1800.00
(95.20 b0) rpm / real32
Defines the minimum allowed speed.
WARNING!
This value must not be higher than 30.12 Maximum
speed.
WARNING!
In frequency control mode, this limit is not effective.
Make sure the frequency limits (30.13 and 30.14)
are set appropriately if frequency control is used.
WARNING!
In a master/follower configuration, do not set
maximum and minimum speed limits with the same
sign on a follower drive. See section
Master/follower functionality (page 34).
Minimum speed30.11
- / -
Minimum allowed speed. For scaling, see parameter 46.1.
-30000.00 ...
30000.00 rpm
1500.00; 1800.00
(95.20 b0) rpm / real32
Defines the maximum allowed speed.
WARNING!
This value must not be lower than 30.11 Minimum
speed.
WARNING!
In frequency control mode, this limit is not effective.
Make sure the frequency limits (30.13 and 30.14))
are set appropriately if frequency control is used.
WARNING!
In a master/follower configuration, do not set
maximum and minimum speed limits with the same
sign on a follower drive. See section
Master/follower functionality (page 34).
Maximum speed30.12
- / -
Maximum speed. For scaling, see parameter 46.1.
-30000.00 ...
30000.00 rpm
Parameters 321