ABB ACS880 - Page 463

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
Follower SW / uint32Defines a target for the data received as word 1 from the
second follower (ie. the follower with node address 3)
through the master/follower link.
See also parameter 62.31 Follower node 3 data 1 value.
For the selections, see parameter 62.4 Follower node 2
data 1 sel.
Follower node 3 data
1 sel
62.7
None / uint32Defines a target for the data received as word 2 from the
second follower (ie. the follower with node address 3)
through the master/follower link.
See also parameter 62.32 Follower node 3 data 2 value.
For the selections, see parameter 62.4 Follower node 2
data 1 sel.
Follower node 3 data
2 sel
62.8
None / uint32Defines a target for the data received as word 3 from the
second follower (ie. the follower with node address 3)
through the master/follower link.
See also parameter 62.33 Follower node 3 data 3 value.
For the selections, see parameter 62.4 Follower node 2
data 1 sel.
Follower node 3 data
3 sel
62.9
Follower SW / uint32Defines a target for the data received as word 1 from the
third follower (ie. the follower with node address 4) through
the master/follower link.
See also parameter 62.34 Follower node 4 data 1 value.
For the selections, see parameter 62.4 Follower node 2
data 1 sel.
Follower node 4 data
1 sel
62.10
None / uint32Defines a target for the data received as word 2 from the
third follower (ie. the follower with node address 4) through
the master/follower link.
See also parameter 62.35 Follower node 4 data 2 value.
For the selections, see parameter 62.4 Follower node 2
data 1 sel.
Follower node 4 data
2 sel
62.11
None / uint32Defines a target for the data received as word 3 from the
third follower (ie. the follower with node address 4) through
the master/follower link.
See also parameter 62.36 Follower node 4 data 3 value.
For the selections, see parameter 62.4 Follower node 2
data 1 sel.
Follower node 4 data
3 sel
62.12
- / uint16(Follower only) Displays, in integer format, the data
received from the master as word 1.
Parameter 62.1 M/F data 1 selection can be used to select
a target for the received data. This parameter can also be
used as a signal source by other parameters.
M/F data 1 value62.25
- / -Data received as word 1 in master/follower communication.0...65535
- / uint16(Follower only) Displays, in integer format, the data
received from the master as word 2.
Parameter 62.2 M/F data 2 selection can be used to select
a target for the received data. This parameter can also be
used as a signal source by other parameters.
M/F data 2 value62.26
- / -Data received as word 2 in master/follower communication.0...65535
Parameters 463