ABB ACS880 - Page 464

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
- / uint16(Follower only) Displays, in integer format, the data
received from the master as word 3.
Parameter 62.3 M/F data 3 selection can be used to select
a target for the received data. This parameter can also be
used as a signal source by other parameters.
M/F data 3 value62.27
- / -Data received as word 3 in master/follower communication.0...65535
- / uint16Displays, in integer format, the data received from the first
follower (ie. follower with node address 2) as word 1.
Parameter 62.4 Follower node 2 data 1 sel can be used
to select a target for the received data. This parameter can
also be used as a signal source by other parameters.
Follower node 2 data
1 value
62.28
- / -Data received as word 1 from follower with node address
2.
0...65535
- / uint16Displays, in integer format, the data received from the first
follower (ie. follower with node address 2) as word 2.
Parameter 62.5 Follower node 2 data 2 sel can be used
to select a target for the received data. This parameter can
also be used as a signal source by other parameters.
Follower node 2 data
2 value
62.29
- / -Data received as word 2 from follower with node address
2.
0...65535
- / uint16Displays, in integer format, the data received from the first
follower (ie. follower with node address 2) as word 3.
Parameter 62.6 Follower node 2 data 3 sel can be used
to select a target for the received data. This parameter can
also be used as a signal source by other parameters.
Follower node 2 data
3 value
62.30
- / -Data received as word 3 from follower with node address
2.
0...65535
- / uint16Displays, in integer format, the data received from the
second follower (ie. follower with node address 3) as word
1.
Parameter 62.7 Follower node 3 data 1 sel can be used
to select a target for the received data. This parameter can
also be used as a signal source by other parameters.
Follower node 3 data
1 value
62.31
- / -Data received as word 1 from follower with node address
3.
0...65535
- / uint16Displays, in integer format, the data received from the
second follower (ie. follower with node address 3) as word
2.
Parameter 62.8 Follower node 3 data 2 sel can be used
to select a target for the received data. This parameter can
also be used as a signal source by other parameters.
Follower node 3 data
2 value
62.32
- / -Data received as word 2 from follower with node address
3.
0...65535
- / uint16Displays, in integer format, the data received from the
second follower (ie. follower with node address 3) as word
3.
Parameter 62.9 Follower node 3 data 3 sel can be used
to select a target for the received data. This parameter can
also be used as a signal source by other parameters.
Follower node 3 data
3 value
62.33
464 Parameters