ABB ACS880 - Page 506

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
No filter / uint16
(Only visible with a BCU control unit)
Filters the list of drive/inverter types listed by parameter
95.31 Parallel type configuration.
Note: This parameter cannot be changed while the drive
is running.
Parallel type list filter95.30
1All types listed.No filter
2-3 (380…415 V) types listed.400 V
3-5 (380…500 V) types listed.500 V
4-7 (525…690 V) types listed.690 V
5Liquid-cooled -7 (525…690 V) types listed.-7 LC (525-690V)
Not selected / uint16
(Visible when 95.30 Parallel type list filter = No filter)
(Only visible with a BCU control unit)
Defines the drive/inverter type if it consists of
parallel-connected modules.
If the drive/inverter consists of a single module, leave the
value at Not selected.
Note: This parameter cannot be changed while the drive
is running.
Parallel type
configuration
95.31
0The drive/inverter does not consist of parallel-connected
modules, or type not selected.
Not selected
-Drive/inverter type consisting of parallel-connected
modules.
[Drive/inverter type]
0.000 / real32Defines the ratio of the step-up transformer.Transformation ratio95.40
1000 = 1 / 1000 = 1Step-up transformer ratio.0.000 ... 100.000
506 Parameters