Terminal mode operation
109
1SVC 440 795 M1100
Select the second station. This station will control the display
and respond to the operating unit.
X Press the OK button.
Select your station.
X Press the Í or Ú button.
X Press the OK button.
Select the START MODE menu option.
X Press the Ú button.
X Press the OK button.
In this case CL-NET station 2 is connection.
The display system tries to establish connection to the
selected device. The text flashes.
Once the connection is established, the menu appears or the
status of the selected device is displayed.
STATION ID: 0
START MODE
h
Station ID:
0 = Station at the serial interface
1 = Station 1 CL-NET
2 = Station 2 CL-NET
3 = Station 3 CL-NET
4 = Station 4 CL-NET
5 = Station 5 CL-NET
6 = Station 6 CL-NET
7 = Station 7 CL-NET
8 = Station 8 CL-NET
STATION ID: 0
START MODE
STATION ID: 0
START MODE
STATION ID: 2
START MODE
Connection
establishment
in progress...
To Next Page
Loading...
