Acre SPC42 - Page 14

SPC products listed have been tested according to EN50131-3:2009 and all relevant RTC
specifications.
Product Type Standard
l
SPC53
l
SPC63
l
SPC6350.320
l
SPC5350.320
l
SPCP355.300
l
SPCP333.300
l
SPCE652.100
l
SPCK420.100
l
SPCK421.100
l
SPCE452.100
l
SPCE110.100
l
SPCE120.100
l
SPCA210.100
l
SPCK620.100
l
SPCK623.100
l
SPCN110.000
l
SPCN320.000
l
SPCN340.000
l
SPCN341.000
l
SPCN342.000
EN50131 Grade 3
l
SPC42
l
SPC52
l
SPCP332.300
l
SPCW120.100
EN50131 Grade 2
Specific information in relation to EN50131 requirements can be found in the following sections in this
document.
Note: Compliance with Section 4.2.2 of EN 50131-5-3
Upon entering Engineer Walktest, the signals between the transmitter and the detectors are attenuated
by 8dB. This provides immunity to attenuation as required by EN 50131-5-3.
EN50131 Requirement (and relevant section) Relevant Vanderbilt documentation
Operating temperature and humidity range Technical data:
l
SPC42/52
l
SPC53
l
SPC63
SPC42/52/53/63 – Installation & Configuration Manual Directives and standards
© Vanderbilt 2023 14 I-200572
08.12.2023