Acre SPC42 - Page 15

EN50131 Requirement (and relevant section) Relevant Vanderbilt documentation
Weights and dimensions Technical data:
l
SPC42/52
l
SPC53
l
SPC63
Fixing details Mounting system equipment on page23
Installation, commissioning, and maintenance instructions
including terminal identifications
Mounting system equipment on page23
Controller hardware on page31
Type of interconnections (see 8.8) Technical data:
l
SPC42/52
l
SPC53
l
SPC63
Wiring the X-BUS interface on page35
Details of methods of setting and unsetting possible (see
11.7.1 to 11.7.3 and Tables 23 to 26)
User programming via the keypad:
l
Setting/Unsetting on page189
l
Configuring a Keyswitch Expander on
page163
l
Configuring wireless fob devices on
page63
l
Triggers on page201
Serviceable parts Technical data:
l
SPC42/52
l
SPC53
l
SPC63
Power supply requirement if no integrated PS See installation instructions for SPCP33x and
SPCP43x Expander PSUs.
Where PS is integrated, the information required by EN
50131-6:2008, Clause 6
Technical data:
l
SPC42/52
l
SPC53
l
SPC63
Maximum number of each type of ACE and expansion device. Wiring the X-BUS interface on page35
Technical data:
l
SPC42/52
l
SPC53
l
SPC63
Current consumption of the CIE and each type of ACE and
expansion device, with and without an alarm condition.
See relevant installation instructions.
SPC42/52/53/63 – Installation & Configuration Manual Directives and standards
© Vanderbilt 2023 15 I-200572
08.12.2023