Acre SPC42 - Page 227

ATP Connections
Active ATP
Connection
Select the ATP connection type when the ATP is operating as the primary
communication path.
l
Permanent: Stay Connected
l
Temporary: Hangup 1second
l
Temporary: Hangup 20 second
l
Temporary: Hangup 80 second
l
Temporary: Hangup 3 minutes
l
Temporary: Hangup 10 minutes
l
Temporary: Hangup 30 minutes
Non-active
ATP
Connection
Select the ATP connection type when the ATP is operating as a backup
communication path.
l
Permanent: Stay Connected
l
Temporary: Hangup 1second
l
Temporary: Hangup 20 seconds
l
Temporary: Hangup 80 seconds
l
Temporary: Hangup 3 minutes
l
Temporary: Hangup 10 minutes
l
Temporary: Hangup 30 minutes
Test Calls
Test Call
Mode (Non
Active ATP)
Select the mode for sending test calls when the ATP is the non-active ATP.
l
Test calls Disabled
l
Test call every 10 minutes
l
Test call every 1 hour
l
Test call every 4 hours
l
Test call every 24 hours
l
Test call every 48 hours
l
Test call every 7 days
l
Test call every 30 days
SPC42/52/53/63 – Installation & Configuration Manual Engineer programming via the browser
© Vanderbilt 2023 227 I-200572
08.12.2023