Acre SPC42 - Page 232

To Next Page

To Previous Page

GPS Coordinates The GPS coordinates of the installation.

ATS Installer Name The name of the installer of the ATS.

Installer Phone Number 1 The phone number of the installer of the ATS.

Installer Phone Number 2 The phone number of the installer of the ATS.

Notes Any additional information for the RCT.

3. Click Save.

15.11.2.4 Configuring an SPC Connect ATS

The Add SPC Connect ATS functionality opens a communication between the panel (SPT) and the

SPC Connect server (RCT), www.spcconnect.com. Using the generated SPC Connect ATS

Registration ID, a panel user can register a user account and panel with the SPC Connect website to

access their panel remotely.

1. To configure an SPC Connect ATS, go to Communications > FlexC > FlexC ATS.

2. On the ATS Configuration page, click Add SPC Connect to open a communication path with

the SPC Connect server.

An SPC Connect ATS is added to the Event Sequence Table with the following attributes:

SPC Connect ATS Registration ID

Default ATP over Ethernet. For information on ATP fields, see Add ATP to FlexC RCT on

page220.

Default Events Profile for SPC Connect

Default Commands Profile for SPC Connect

Default RCT URL is www.spcconnect.com

The SPT Account Code for the ATP is populated.

Make a note of the SPC Connect ATS Registration ID and provide this to the customer

along with the SPCConnect System User Guide.

15.11.2.5 Exporting and Importing an ATS

ATS files have a .cxml extension. You must create the ATS in the SPC browser and export it before

you can import it to a system.

1. To export an ATS, go to Communications > FlexC > FlexC ATS.

2. In the Configured ATS table, locate the ATS to export and click the Export ATS button (green

arrow.

3. Save the file with the default filename export_flexc.cxml or rename the file.

4. To view the file, open in Notepad.

5. To import an ATS into the system, go to Communications > FlexC > FlexC ATS.

6. Scroll down to Import ATS.

7. Click the Browse button and select an ATS to import (.cxml file extension).

8. Click Import ATS.

The ATS displays in the Configured ATS table with the next available ID.

When you export an ATS, the SPT Account Code changes to 0. This prevents an ATS being

exported and then imported and replicating an existing ATS.

SPC42/52/53/63 – Installation & Configuration Manual Engineer programming via the browser

08.12.2023