EasyManua.ls Logo

Acre SPC42 - Page 84

Acre SPC42
297 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Name Description
VISUAL
INDICATIONS
(Flexible Mode
only)
Enables you to assign specific behaviour to each LED on the indicator module. Each of the
LEDs has the following options:
l
FUNCTION the following options are available:
KEYSWITCH select a keyswitch and the position of the key.
DISABLED select to disable the LED.
SYSTEM select the alarm type which triggers the LED.
AREA select the area which triggers the LED.
ZONE select the zone which triggers the LED
DOOR select the door and the door option which triggers the LED.
l
ON COLOR specify the activation colour
l
ON FLASH specify the behaviour of the LED in active state. Available options are:
Permanent always on.
Flash Fast/Medium/Slow varying speed of the flashing.
l
OFF COLOR specify the deactivation colour.
l
OFF FLASH specify the behaviour of the LED in the inactive state. Available
options are:
Permanent always on.
Flash Fast/Medium/Slow varying speed of the flashing.
LED ALWAYS Enable if LED indicators remain active when keys are deactivated.
AUDIBLE IND.
(Flexible Mode
only)
Select the audible indicators for alarms, entry/exit, and keypresses,
DEACTIVATION
(Flexible Mode
only)
Choose one, or more, of the following deactivation options:
l
Calendar select a calendar from the available options.
l
Keyswitch select a keyswitch from the available options.
l
Keypad - select a keypad from the available options.
l
Card Reader enable or disable deactivation using a keypad.
MODE Select Linked or Flexible. Linked mode reduces the number of options available in the
Expander Edit menu.
INPUT Select the zone
Editing Keyswitch Expanders
The following table lists the available options for keyswitch expanders:
Name Description
DESCRIPTION Enter or edit a description for the expander.
LOCATION Select a location for the expander from the list of defined areas.
LATCH Enable or disable the latch on the key position.
SPC42/52/53/63 Installation & Configuration Manual Engineer programming via the keypad
© Vanderbilt 2023 84 I-200572
08.12.2023

Table of Contents