6253 DC Voltage Current Source/Monitor Operation Manual
5.9 Sample Programs
5-50
5.9 Sample Programs
This section describes program examples to remotely control the 6253 via GPIB or USB.
Download these programs from ADC’s website.
https://www.adcmt.com/en/download/sampleprogram
5.9.1 Program Example for GPIB
[Operating environment]
OS: Microsoft Windows 7
GPIB hardware: NATIONAL INSTRUMENTS GPIB-USB-HS
Module: Niglobal.bas, Vbib-32.bas (included in GPIB-USB-HS)
Language: Microsoft Excel Visual Basic for Application (VBA)
• Program example 1: Example of DC measurement introduced in Section 2.5.1
• Program example 2: Example of pulse measurement introduced in Section 2.5.2
• Program example 3: Example of sweep measurement introduced in Section 2.5.3
5.9.2 Program Example for USB
[Operating environment]
OS: Microsoft Windows 7
Module: ausb.bas (ADC instruments USB driver)
Language: Microsoft Excel Visual Basic for Application (VBA)
• Program example 1: Example of DC measurement introduced in Section 2.5.1
• Program example 2: Example of pulse measurement introduced in Section 2.5.2
• Program example 3: Example of sweep measurement introduced in Section 2.5.3
Download the ADC instruments USB driver from ADC’s website.
https://www.adcmt.com/en/download/usbdriver
To Next Page
