ADCMT 6253 - Page 55

6253 DC Voltage Current Source/Monitor Operation Manual
2.5.3 Sweep Measurement
2-21
Input values at the Sweep Value layer.
Select the parameters on the left of the Sweep Value layer with the rotary knob.
Press the ENTER key to move to the Input/Run level on the right to edit the values.
Input the values in the edit status and press the ENTER key to fix them and return to the Select level.
Press the MENU key to return to the home screen.
Time settings
Display the time setting screen with the soft key Time
Set the relevant parameters as in the case of pulse source.
4
Input/Run levelSelect level
5