MENU
Category Edit (Input/Run level)Select
1) I/F BUS Interface selection
USB/GPIB/LAN/RS232
2) Header Header
ON/OFF
3) Output Monitor Monitor output
ON/OFF
4) GPIB Address GPIB address
0 to 30
5) USB ID USB. ID
1 to 127
6) RS232 Config RS232 configuration
1) Baud Rate Baud rate
19200/9600/4800/2400/1200/600/300
2) Data Bit Data bit
8 bit/7 bit
3) Parity Bit Parity bit
NONE/ODD/EVEN
4) Stop Bit Stop bit
1 bit/2 bit
7) IP Address IP address
0.0.0.0 to 255.255.255.255
8) Gateway Default gateway
0.0.0.0 to 255.255.255.255
9) Subnet Mask Subnet mask
0.0.0.0 to 255.255.255.255
10) MAC Address MAC address
*Viewing only and setting Not available
12) Interface
To Next Page
Loading...
