6253 DC Voltage Current Source/Monitor Operation Manual
3.2.1 MENU Key (Parameter Setting)
3-13
Data Bit Selects the number of data bits.
8 bit: Data length of 8 bits
7 bit: Data length of 7 bits
Parity Bit Selects the parity bit.
NONE: No parity bit
ODD: Odd parity bit
EVEN: Even parity bit
Stop Bit Selects the stop bit.
1 bit: Stop bit of 1 bit
2 bit: Stop bit of 2 bits
IP Address Sets the IP address between 0.0.0.0 and 255.255.255.255.
Gateway Sets the default gateway between 0.0.0.0 and 255.255.255.255.
Subnet Mask Sets the subnet mask between 0.0.0.0 and 255.255.255.255.
MAC Address Displays the MAC address.
(Viewing only)
13) System Sets the system-related parameters.
Limit Buzzer Sounds when the limit (compliance) is activated.
ON: Turns ON the limit detection buzzer.
OFF: Turns OFF the limit detection buzzer.
Compare Buzzer Sounds according to the comparator calculation result of
measurement data.
OFF: Turns OFF the comparator calculation buzzer.
HI: Sounds when the comparator calculation result is HI.
GO: Sounds when the comparator calculation result is GO.
LO: Sounds when the comparator calculation result is LO.
HI or LO
: Sounds when the comparator calculation result is HI or
LO.
Notice Buzzer Sounds when operations such as memory full, saving or loading
parameters are complete.
ON: Turns ON the notice buzzer.
OFF: Turns OFF the notice buzzer.
To Next Page
Loading...
