Agilent Technologies 4155B User Manual

4-32 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
Making a Measurement
Sweep Measurements
To Execute or Stop Measurement
• To execute a measurement, press:
• Single key in the MEASUREMENT key group for single measurement.
• Repeat key in the MEASUREMENT key group for repeat measurement.
• Append key in the MEASUREMENT key group for append measurement.
• To stop a measurement, press Stop key in the MEASUREMENT key group.
Single, Repeat, and Append Measurement
There are three measurement execution modes as follows:
Single
measurement Clears GRAPHICS or LIST screen, then executes measurement
one time. Measurement results are displayed on GRAPHICS or
LIST screen.
Repeat
measurement Executes measurements continuously. Before each
measurement is executed, the GRAPHICS or LIST screen is
cleared. Most recent measurement results are displayed on
GRAPHICS or LIST screen.
Append
measurement Executes measurement one time. Does not clear GRAPHICS or
LIST screen. That is, measurement results are added to the
existing results.

Agilent Technologies 4155B Specifications

General

Brand	Agilent Technologies
Model	4155B
Category	Measuring Instruments
Language	English