8-20 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
If You Have A Problem
If Errors Occur
If Errors Occur when You Operate the 4155B/4156B
The following error codes and messages can occur when operating the
4155B/4156B. The error codes and messages are displayed in a message window or
in the message display area at the bottom of the screen.
1 Syntax error. Input should be integer number.
3 Syntax error. Input should be real number.
4 Syntax error. Unrecognized parameter.
5 Illegal setup. The parameter is out of range.
6 DATA buffer full. Too many APPEND.
7 DATA buffer full. Too many points.
8 Cannot define more than 6 User Vars.
9 Syntax error. First char should be Alphabet.
10 Syntax error. Must be alphanumeric.
11 Name must be set for user function/variable.
Name setup cannot be omitted when setting a user function or a user
variable name.
12 Syntax error. Unknown variable name.
13 System error. HOSTC received invalid data.
The 4155B/4156B may be broken. Contact the nearest Agilent
Technologies Sales and Service office.
14 System error. Unable to communicate with SMUC.
The 4155B/4156B may be broken. Contact the nearest Agilent
Technologies Sales and Service office.
15 System error. Illegal command to SMUC.
The 4155B/4156B may be broken. Contact the nearest Agilent
Technologies Sales and Service office.
16 Illegal operation. Too many LIST data.
17 Unable to display data list. Not enough memory.
To Next Page
Loading...
Need help?
General
