Agilent 4155B/4156B User’s Guide Vol.2, Edition 5 6-63
Screen Organization
GRAPH/LIST Screen Group
In this column head, you can confirm how many append measurements you have
executed and which append you are currently viewing. Refer to the following
example:
2/4
If the above appears in the column head, it means you have appended three
measurements to the original measurement (total four measurements), and you are
currently viewing the second measurement (first append measurement).
Measurement Results
These columns display measurement result data for the variables that you set up in
the LIST area on the DISPLAY: DISPLAY SETUP screen. The GRAPH/LIST:
LIST screen shows only four columns for the data. If you have defined more than
four variable values, you can scroll right or left by using the left arrow or right arrow
front-panel key.
Data Variable Display
This area displays the numerical value for the variables that you set up in the DATA
VARIABLES area on DISPLAY: DISPLAY SETUP screen. This is the value of the
variable at the marker position.
AXIS Y1 softkey
For GRAPH/LIST: GRAPHICS screen, this softkey is used to toggle active axis to
analyze between the Y1 and Y2 axis.
For GRAPH/LIST: LIST screen, this softkey only has meaning for the data variable
fields, which are just above the primary softkeys. If you set up a data variable that
uses a line or marker read-out function, selecting this softkey changes displayed data
variable value according to read-out function.
This softkey is displayed only if Y2 axis is set up.
To Next Page
Loading...
Need help?
General
