Agilent 4155B/4156B User’s Guide Vol.2, Edition 5 6-11
Screen Organization
CHANNELS Screen Group
SERIES RESISTANCE.
In the SERIES RESISTANCE fields, you select the value that you want to set in
Agilent 16441A R-Box. When the pointer is located in this field, allowable
resistance values are shown in the secondary softkey area. You select the desired
series resistance.
Normally, SMU1 and SMU2 have SERIES RESISTANCE fields. However, if the
SMU and Pulse Generator Expander is installed and if the expander has an HPSMU,
then SMU1 and SMU5 have SERIES RESISTANCE fields.
If the 16441A R-box is not installed, you must set 0 W in this field.
Restrictions:
• To use Kelvin connection for HRSMU or HPSMU, you must select 0 W.
• For STBY channels, you can set 0 W only.
• For COMMON channels, you can set 0 W only.
To Next Page
Loading...
Need help?
General
