6-34 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
Screen Organization
MEASURE Screen Group
• TRIG OUT DELAY
TRIG OUT DELAY field is displayed when you set pulse sweep measurement.
The trigger output delay time specifies how much to delay the trigger after the
leading edge. For details about trigger output delay time, refer to “Triggering an
External Instrument” in Chapter 3. When you set TRIG IN in the FUNCTION
field, this field has no meaning, so "-----" is displayed.
• POLARITY
In the POLARITY field, select secondary softkeys to select trigger polarity as
follows: POSITIVE or NEGATIVE.
To Next Page
Loading...
Need help?
General
