Using the System Utilities Additional Information
Agilent 8163A/B, 8164A/B & 8166A/B Mainframes, Sixth Edition 67
Figure 29 Editing the Date and the Time
3 Use the cursor key to move to the Date field. Press the [Edit] softkey. The day of
the month is highlighted.
4 Use the left and right cursor keys to move to the day, month or year. Edit the day,
month or year using the cursor key. Press Enter.
5 Perform steps 3 to 4 again if the date is not fully correct.
6 Use the cursor key to move to the Time field. Press the [Edit] softkey. The hour
of the day is highlighted. The 24-hour clock is used.
7 Use the left and right cursor keys to move to the hour, minute, or second. Edit the
hour, minute, or second using the cursor key. Press [OK].
8 Perform steps 6 to 7 again if the date is not fully correct.
9 When the time and date are both correct, press [Close] to return to the
configuration menu.
To Next Page
Loading...
Need help?
General
