Alcatel-Lucent 7210 SAS M Service Guide

VPRN Show Commands
7210-SAS M Services Guide Page 723
Sample Output
*A:ALA-12# show service sap-using sap 1/1
==============================================================================
Service Access Points
==============================================================================
PortId SvcId SapMTU I.QoS I.Mac/IP E.QoS E.Mac/IP A.Pol Adm Opr
------------------------------------------------------------------------------
1/1/7:0 1 1518 10 8 10 none none Up Up
1/1/11:0 100 1514 1 none 1 none none Down Down
1/1/7:300 300 1518 10 none 10 none 1000 Up Up
------------------------------------------------------------------------------
Number of SAPs : 3
------------------------------------------------------------------------------
*A:ALA-12#
sdp
Syntax sdp [sdp-id | far-end ip-address] [detail | keep-alive-history]
Context show>service
Description Displays SDP information.
If no optional parameters are specified, a summary SDP output for all SDPs is displayed.
Parameters sdp-id — The SDP ID for which to display information.
Default All SDPs.
Values 1 — 17407
far-end ip-address — Displays only SDPs matching with the specified far-end IP address.
Default SDPs with any far-end IP address.
detail — Displays detailed SDP information.
Default SDP summary output.
keep-alive-history — Displays the last fifty SDP keepalive events for the SDP.
Default SDP summary output.
Output Show Service SDP — The following table describes show service SDP output fields:
Opr
The actual state of the SAP.
Label Description (Continued)
Label Description
SDP Id
The SDP identifier.
Adm MTU
Specifies the largest service frame size (in octets) that can be transmit-
ted through this SDP to the far-end router, without requiring the packet
to be fragmented.

Alcatel-Lucent 7210 SAS M Specifications

General

Brand	Alcatel-Lucent
Model	7210 SAS M
Category	Switch
Language	English