Alcatel-Lucent 7210 SAS M - Page 831

VLL Show Commands
7210 SAS M Services Guide Page 831
*A:Dut-A>show>service>id# endpoint
===============================================================================
Service 1501 endpoints
===============================================================================
Endpoint name : coreSide
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Standby Signaling Master : true
Tx Active : 1413:1501
Tx Active Up Time : 0d 03:46:25
Revert Time Count Down : N/A
Tx Active Change Count : 2
Last Tx Active Change : 02/21/2011 13:07:12
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
Spoke-sdp: 1413:1501 Prec:1 Oper Status: Up
Spoke-sdp: 1613:1501 Prec:2 Oper Status: Up
===============================================================================
Endpoint name : accessSide
Description : (Not Specified)
Revert time : 0
Act Hold Delay : 0
Standby Signaling Master : false
Tx Active : lag-3:1501.1501
Tx Active Up Time : 0d 03:46:52
Revert Time Count Down : N/A
Tx Active Change Count : 1
Last Tx Active Change : 02/21/2011 13:06:45
-------------------------------------------------------------------------------
Members
-------------------------------------------------------------------------------
SAP : lag-3:1501.1501 Oper Status: Up
===============================================================================
===============================================================================
labels
Syntax labels
Context show>service>id
Description Displays the labels being used by the service.
Output Show Service-ID Labels — The following table describes show service-id labels output fields:
Label Description
Svc Id
The service identifier.
Sdp Id
The SDP identifier.
Type
Indicates whether the SDP is a spoke or a mesh.