Virtual Private Routed Network Services
7750 SR OS Services Guide Page 1003
create — Keyword used to create a SAP instance.
split-horizon-group group-name — Specifies the name of the split horizon group to which the SAP
belongs.
tod-suite
Syntax tod-suite tod-suite-name
no tod-suite
Context config>service>vprn>if>sap
Description This command applies a time-based policy (filter or QoS policy) to the SAP. The suite name must
already exist in the config>cron context.
Default no tod-suite
Parameters tod-suite-name — Specifies collection of policies (ACLs, QoS) including time-ranges that define the
full or partial behavior of a SAP or a subscriber. The suite can be applied to more than one SAP.
Ethernet QinQ qtag1: 0 — 4094
qtag2: 0 — 4094
The SAP is identified by two 802.1Q tags on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
SONET/SDH IPCP - The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
SONET/SDH
TDM
BCP-Null 0 The SAP is identified with a single service on the
channel. Tags are assumed to be part of the customer
packet and not a service delimiter.
SONET/SDH
TDM
BCP-Dot1q 0 — 4094 The SAP is identified by the 802.1Q tag on the channel.
SONET/SDH
TDM
Frame Relay 16 — 991 The SAP is identified by the data link connection
identifier (DLCI).
SONET/SDH
ATM
ATM vpi (NNI) 0 — 4095
vpi (UNI) 0 — 255
vci 1, 2, 5 — 65535
-
The SAP is identified by port or by PVPC or PVCC
identifier (vpi, vpi/vci, or vpi range)
To Next Page
Loading...
