Virtual Private LAN Services
7750 SR OS Services Guide Page 439
Deleting a VPLS Service
A VPLS service cannot be deleted until SAPs and SDPs are unbound (deleted), interfaces are
shutdown, and the service is shutdown on the service level.
Use the following CLI syntax to delete a VPLS service:
CLI Syntax: config>service
[no] vpls service-id
shutdown
[no] mesh-sdp sdp-id
shutdown
sap sap-id [split-horizon-group group-name]
no sap sap-id
shutdown
Example
: config>service# vpls 10
config>service>vpls# mesh-sdp 6
config>service>vpls>mesh-sdp# shutdown
config>service>vpls>mesh-sdp# exit
config>service>vpls# no mesh-sdp 6
config>service>vpls# sap 1/1/5:22
config>service>vpls>sap# shutdown
config>service>vpls>sap# exit
config>service>vpls# no sap 1/1/5:22
config>service>vpls# shutdown
config>service>vpls# exit
config>service# no vpls 10
Disabling a VPLS Service
You can shut down an VPLS service without deleting the service parameters.
CLI Syntax: config>service> vpls service-id
shutdown
Example
: config>service# vpls 10
config>service>vpls# shutdown
config>service>vpls# exit
To Next Page
Loading...
