VPLS Service Configuration Commands
Page 474 7750 SR OS Services Guide
General Switch Management Protocol Commands
gsmp
Syntax gsmp
Context config>service>vpls
Description This command enables the context to configure General Switch Management Protocol (GSMP)
connections maintained in this service.
Default not enabled
group
Syntax [no] group name
Context config>service>vpls>gsmp
Description This command specifies a GSMP name. A GSMP group name is unique only within the scope of the
service in which it is defined.
ancp
Syntax ancp
Context config>service>vpls>gsmp>group
Description This command configures Access Node Control Protocol (ANCP) parameters for this GSMP group.
dynamic-topology-discover
Syntax [no] dynamic-topology-discover
Context config>service>vpls>gsmp>group>ancp
Description This command enables the ANCP dynamic topology discovery capability.
The no form of this command disables the feature.
line-configuration
Syntax [no] line-configuration
Context config>service>vpls>gsmp>group>ancp
To Next Page
Loading...
