Basic Mirroring Configuration
Page 1318 7750 SR OS Services Guide
Mirror Classification Rules
Alcatel-Lucent’s implementation of mirroring can be performed by configuring parameters to
select network traffic according to any combination of the following entities:
• Port
• SAP
• MAC filter
• IP filter
• Ingress label
Port The port command associates a port to a mirror source. The port is identified by the port-id.
The following displays the port-id syntax:
port-id: slot/mda/port[.channel]
aps-id aps-group-id[.channel]
aps keyword
group-id 1 — 64
bundle-type-slot/mda.bundle-num
bundle keyword
type ima, ppp
bundle-num 1 — 128
ccag-id - ccag-id.path-id[cc-type]:cc-id
ccag keyword
id 1 — 8
path-id a, b
cc-type .sap-net, .net-sap
cc-id 0 — 4094
lag-id 1 — 64
egress keyword
ingress keyword
The defined port can be an ATM, Ethernet or Frame Relay port, a SONET/SDH path, a multilink
bundle, a TDM channel, a Cross Connect Aggregation Group (CCAG), or a Link Aggregation
Group (LAG) ID. If the port is a SONET/SDH or TDM channel, the channel ID must be specified
to identify which channel is being mirrored. When a LAG ID is given as the port ID, mirroring is
enabled on all ports making up the LAG.
To Next Page
Loading...
