OAM and SAA Command Reference
Page 1426 7750 SR OS Services Guide
Service Assurance Agent (SAA) Commands
saa
Syntax saa
Context config
Description This command creates the context to configure the Service Assurance Agent (SAA) tests.
test
Syntax test name [owner test-owner]
no test name
Context config>saa
Description This command identifies a test and create/modify the context to provide the test parameters for the
named test. Subsequent to the creation of the test instance the test can be started in the OAM context.
A test can only be modified while it is shut down.
The no form of this command removes the test from the configuration. In order to remove a test it can
not be active at the time.
Parameters name — Identify the saa test name to be created or edited.
owner test-owner — Specifies the owner of an SAA operation up to 32 characters in length.
Values If a test-owner value is not specified, tests created by the CLI have a default owner
“TiMOS CLI”.
description
Syntax description description-string
no description
Context config>saa>test
Description This command creates a text description stored in the configuration file for a configuration context.
The description command associates a text string with a configuration context to help identify the
content in the configuration file.
The no form of this command removes the string from the configuration.
Default No description associated with the configuration context.
Parameters string — The description character string. Allowed values are any string up to 80 characters long
composed of printable, 7-bit ASCII characters. If the string contains special characters (#, $,
spaces, etc.), the entire string must be enclosed within double quotes.
To Next Page
Loading...
