Alcatel-Lucent 7750 SR OS - Creating an Fpipe Service

Configuring a VLL Service with CLI
Page 182 7750 SR OS Services Guide
Creating an Fpipe Service
Use the following CLI syntax to create an Fpipe service.
CLI Syntax: config>service# fpipe service-id [customer customer-id] [vpn
vpn-id] [vc-type {fr-dlci}][vc-switching]
description description-string
service-mtu octets
no shutdown
The following example displays the command usage to create an Fpipe service:
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# fpipe 1 customer 1 create
A:ALA-41config>service>fpipe# description “fpipe test”
A:ALA-41config>service>fpipe# service-mtu 1400
A:ALA-41config>service>fpipe# no shutdown
A:ALA-41config>service>fpipe#
PE router 2 (A:ALA-42):
Example: A:ALA-42>config>service# fpipe 1 customer 1 create
A:ALA-42>config>service>fpipe# description “fpipe test”
A:ALA-42>config>service>fpipe# service-mtu 1400
A:ALA-42>config>service>fpipe# no shutdown
A:ALA-42>config>service>fpipe#
The following example displays the Fpipe service creation output.
PE router 1 (A:ALA-41):
A:ALA-41>config>service# info
-------------------------------------------
...
fpipe 1 customer 1 create
description “fpipe test”
service-mtu 1400
no shutdown
exit
...
-------------------------------------------
A:ALA-41>config>service#
PE router 2 (A:ALA-42):
A:ALA-42>config>service# info
-------------------------------------------
...
fpipe 1 customer 1 create
description “fpipe test”
service-mtu 1400
no shutdown
exit
...
-------------------------------------------
A:ALA-42>config>service#