Virtual Private LAN Services
7750 SR OS Services Guide Page 645
Clear Commands
id
Syntax id service-id
Context clear>service
clear>service>statistics
Description This command clears commands for a specific service.
Parameters service-id — The ID that uniquely identifies a service.
authentication
Syntax authentication
Context clear>service>id
Description Enters the context to clear session authentication information.
statistics
Syntax statistics
Context clear>service>id>authentication
Description Clears session authentication statistics for this service.
fdb
Syntax fdb {all | mac ieee-address | sap sap-id] | mesh-sdp sdp-id[:vc-id] | spoke-sdp sdp-id:vc-
id}
Context clear>service>id
Description Clears FDB entries for the service.
Parameters all — Clears all FDB entries.
mac ieee-address — Clears only FDB entries in the FDB table with the specified 48-bit MAC
address. The MAC address can be expressed in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff
where aa, bb, cc, dd, ee and ff are hexadecimal numbers.
sap-id — Specifies the physical port identifier portion of the SAP definition.
mesh-sdp — Clears only service FDB entries associated with the specified mesh SDP ID. For a mesh
SDP, the VC ID is optional.
To Next Page
Loading...
