OAM and SAA Command Reference
7750 SR OS Services Guide Page 1389
OAM Command Reference
Command Hierarchies
Operational Commands
GLOBAL
— ping [ip-address | dns-name] [rapid | detail] [ttl time-to-live] [tos type-of-service] [size bytes] [pattern
pattern] [source ip-address | ipv6-address | dns-name ] [interval seconds] [{next-hop ip-address} |
{interface interface-name} | bypass-routing] [count requests] [do-not-fragment] [router router-
instance] [timeout timeout]
— traceroute [ip-address | dns-name] [ttl ttl] [wait milli-seconds] [no-dns][source src-ip-address] [tos
type-of-service] [router [router-instance]
ATM Diagnostics
GLOBAL
— oam
— atm-ping port-id:vpi/vci [end-to-end | segment] [dest destination-id][send-count send-
count][timeout seconds][interval seconds]
LDP Diagnostics
GLOBAL
— oam
— ldp-treetrace {prefix ip-prefix/mask} [max-ttl ttl-value] [max-path max-paths] [timeout tim-
eout] [retry-count retry-count] [fc fc-name [profile profile]]
— config
— test-oam
— [no] ldp-treetrace
— fc fc-name [profile {in|out}]
— no fc
— path-discovery
— interval minutes
— no interval
— max-path max-paths
— no max-path
— max-ttl ttl-value
— no max-ttl
— policy-statement policy-name[...(up to 5 max)]
— no policy-statement
— retry-count retry-count
— no retry-count
— timeout timeout
— no
timeout
— path-probing
— interval minutes
— no interval
— retry-count retry-count
— no retry-count
— timeout timeout
— no timeout
—[no] shutdown