List of Commands
Page 58 7750 SR OS Services Guide
List of Commands
Table 2 lists all the configuration commands to configure subscriber accounts and SDPs,
indicating the configuration level at which each command is implemented with a short command
description.
The services command list is organized in the following task-oriented manner:
• Configuring a customer account
• Configuring an SDP
→ Configuring SDP class forwarding parameters
→ Configure SDP Keepalive parameters
•
Table 1: CLI Commands to Configure Service Parameters
Command Description Page
Configuring a customer account
config>service
64
customer
Creates a customer ID and customer context that is used to associate
information with a particular customer.
81
contact
Creates a customer ID and customer context that is used to associate
information with a particular customer.
81
description
Creates a text description stored in the configuration file for the cus-
tomer.
79
multi-service-site
Creates a new customer site or edits an existing customer site. A cus-
tomer site is an anchor point to create an ingress and egress virtual
scheduler hierarchy. Multi-service customer sites create a virtual
scheduler hierarchy and making it available to queues on multiple Ser-
vice Access Points (SAPs).
82
assignment
Specifies the port for the multi-service. 83
description
Creates a text description stored in the configuration file for a configu-
ration context for the multi-service-site.
79
egress
Specifies egress parameters and policies. 84
agg-rate-limit
Defines a maximum total rate for all egress queues on a service SAP
or multi-service site.
85
ingress
Specifies ingress parameters and policies. 84
tod-suite
Configures a time-of-day suite for this multi-service site. 89
To Next Page
Loading...
