Configuring an IES Service with CLI
Page 702 7750 SR OS Services Guide
Deleting an IES Service
An IES service cannot be deleted until SAPs and interfaces are shut down and deleted and the
service is shutdown on the service level.
Use the following CLI syntax to delete an IES service:
CLI Syntax:config>service#
[no] ies service-id
shutdown
[no] interface ip-int-name
shutdown
[no] sap sap-id
shutdown
Example
: config>service# ies 1000
config>service>ies# shutdown
config>service>ies# interface "to-web"
config>service>ies>if# shutdown
config>service>ies>if# sap 2/1/50:0
config>service>ies>if>sap# shutdown
config>service>ies>if>sap# exit
config>service>ies>if# no sap 2/1/50:0
config>service>ies>if# exit
config>service>ies# no interface "to-web"
config>service>ies# exit
config>service# no ies 1000
The service is removed from the configuration.
To Next Page
Loading...
