Alcatel-Lucent 7750 SR OS - Service Management Tasks

Virtual Private Routed Network Services
7750 SR OS Services Guide Page 919
Service Management Tasks
This section discusses the following service management tasks:
• Modifying VPRN Service Parameters on page 919
• Deleting a VPRN Service on page 921
Modifying VPRN Service Parameters
Use the CLI syntax to modify VPRN parameters (VPRN Services Command Reference on page
925).
The following displays the command usage to configure additional VPRN parameters and remove
RIP from the configuration:
Example: config>service# vprn 1
config>service>vprn# ecmp 8
config>service>vprn# maximum-routes 2000
config>service>vprn# rip
config>service>vprn>rip# shutdown
config>service>vprn>rip# exit
config>service>vprn# no rip
config>service>vprn#
The following example displays the VPRN service creation output.
*A:ALA-1>config>service# info
----------------------------------------------
...
vprn 1 customer 1 create
shutdown
vrf-import "vrfImpPolCust1"
vrf-export "vrfExpPolCust1"
ecmp 8
maximum-routes 2000
autonomous-system 10000
route-distinguisher 10001:1
interface "to-ce1" create
address 10.1.1.1/24
sap 1/1/10:1 create
exit
exit
static-route 6.5.0.0/24 next-hop 10.1.1.2
bgp
router-id 10.0.0.1
group "to-ce1"
export "vprnBgpExpPolCust1"