Alcatel-Lucent 7750 SR OS - List of Commands

Virtual Leased Line Services
7750 SR OS Services Guide Page 149
List of Commands
Table 4 lists all the service configuration commands indicating the configuration level at which
each command is implemented with a short command description. VLL services are configured in
the
config>service context. The command list is organized in the following task-oriented
manner:
• Configure an Epipe service
→ Configure an Epipe SAP
− Configure Epipe SAP ATM parameters
− Configure Epipe SAP egress parameters
− Configure Epipe SAP ingress parameters
→ Configure an Epipe spoke SDP
• Configure an Apipe service
→ Configure Apipe service parameters
→ Configure Apipe SAP parameters
− Configure Apipe SAP ATM parameters
→ Configure Apipe spoke SDP parameters
• Configure an Fpipe service
→ Configure Fpipe service parameters
→ Configure Fpipe SAP parameters
→ Configure Fpipe spoke SDP parameters
• Configure an Ipipe service
→ Configure an Ipipe SAP
− Configure Ipipe SAP ATM parameters
− Configure Ipipe SAP egress parameters
− Configure Ipipe SAP ingress parameters
→ Configure Ipipe spoke SDP parameters
• Configure endpoint parameters