Alcatel-Lucent 7750 SR OS - Re-Enabling an Apipe Service

Configuring a VLL Service with CLI
Page 210 7750 SR OS Services Guide
qos 102
exit
egress
qos 103
exit
exit
spoke-sdp 1:4 create
egress
vc-label 16
exit
exit
...
-------------------------------------
A:ALA-42>config>service#
Re-enabling an Apipe Service
To re-enable an Apipe service that was shut down.
CLI Syntax: config>service#
apipe service-id
no shutdown
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# apipe 5
A:ALA-41>config>service>apipe# no shutdown
A:ALA-41>config>service>apipe# exit
PE router 2 (A:ALA-42):
Example: A:ALA-42>config>service# apipe 5
A:ALA-42>config>service>apipe# no shutdown
A:ALA-42>config>service>apipe# exit