Service Management Tasks
Page 1336 7750 SR OS Services Guide
Modifying a Local Mirrored Service
Existing mirroring parameters can be modified in the CLI. The changes are applied immediately.
The service must be shut down if changes to the SAP are made. Refer to page 1335 for the
complete list of commands and options.
The following example displays commands to modify parameters for a basic local mirroring
service.
Example:config>mirror# mirror-dest 103
config>mirror>mirror-dest# shutdown
config>mirror>mirror-dest# no sap
config>mirror>mirror-dest# sap 3/1/5:0 create
config>mirror>mirror-dest>sap$ exit
config>mirror>mirror-dest# fc premium
config>mirror>mirror-dest# slice-size 128
config>mirror>mirror-dest# no shutdown
debug# mirror-dest 103
debug>mirror-source# no port 2/1/24 ingress egress
debug>mirror-source# port 3/1/7 ingress egress
The following displays the local mirrored service modifications:
*A:ALA-A>config>mirror# info
----------------------------------------------
mirror-dest 103 create
no shutdown
fc premium
remote-source
exit
sap 3/1/5:0 create
egress
qos 1
exit
exit
slice-size 128
exit
*A:ALA-A>debug>mirror-source# show debug mirror
debug
mirror-source 103
no shutdown
port 3/1/7 egress ingress
exit
*A:ALA-A>debug>mirror-source#
To Next Page
Loading...
