Alcatel-Lucent 7750 SR OS - Re-Enabling an Fpipe Service

Virtual Leased Line Services
7750 SR OS Services Guide Page 215
shutdown
description "fpipe test"
service-mtu 1400
sap 2/1/1.1:16 create
accounting-policy 2
ingress
qos 101
exit
egress
qos 1020
exit
exit
spoke-sdp 1:1 create
egress
filter ip 10
exit
exit
...
-------------------------------------
A:ALA-42>config>service#
Re-enabling an Fpipe Service
To re-enable an Fpipe service that was shut down.
CLI Syntax: config>service#
fpipe service-id
no shutdown
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# no shutdown
A:ALA-41>config>service>fpipe# exit
PE router 2 (A:ALA-42):
Example: A:ALA-42>config>service# fpipe 1
A:ALA-42>config>service>fpipe# no shutdown
A:ALA-42>config>service>fpipe# exit