Versatile Service Module
7750 SR OS Services Guide Page 1247
Configure VSM CCAG Components
Use the CLI syntax displayed below to configure the following entities:
• Provision VSM on an MDA on page 1247
• Cross Connecting Network IP Interfaces on page 1250
• Provision CCAG Parameters on page 1248
• Configure Path Components on page 1249
• Cross Connecting Services on page 1252
Provision VSM on an MDA
Before a CCA module may be utilized in the system, the CCA must be provisioned into an MDA
slot. The MDA provisioning command must be modified to support provisioning a CCA adaptor
type. Up to 8 member CCAs can be configured per CCAG.
CLI Syntax: config>card# mda mda-number mda-type {other-MDA-type|cca}
The following example displays the command usage to provision CCA on an MDA:
Example:config# card 10
config>card# mda 1
config>card>mda# mda-type vsm-cca
config>card>mda# exit
config>card#
The following example displays the configuration:
A:ALA-48>config>card# info
----------------------------------------------
card-type iom-20g
mda 1
mda-type vsm-cca
exit
mda 2
mda-type m20-1gb-tx
exit
----------------------------------------------
A:ALA-48>config>card#
To Next Page
Loading...
