Alcatel-Lucent 7750 SR OS - Configuring an Apipe Service

Configuring a VLL Service with CLI
Page 162 7750 SR OS Services Guide
Configuring an Apipe Service
The following fields require specific input (there are no defaults) to configure basic Apipe
services:
• Customer ID (refer to Configuring Customers on page 64)
• Specify SAP parameters
• Specify spoke SDP parameters
The following example displays sample configurations of Apipe services.
PE Router 1 (ALA-41):
A:ALA-41>config>service# info
-------------------------------------
...
apipe 5 customer 1 create
description "apipe test"
service-mtu 1400
sap 1/1/1:0/32 create
ingress
qos 102
exit
egress
qos 103
exit
exit
spoke-sdp 1:4 create
exit
no shutdown
exit
...
-------------------------------------
A:ALA-41>config>service#
PE Router 2 (ALA-42):
A:ALA-42>config>service# info
-------------------------------------
...
apipe 5 customer 1 create
description "apipe test"
service-mtu 1400
sap 2/2/2:0/32 create
ingress
qos 102
exit
egress
qos 103
exit
exit
spoke-sdp 1:4 create
exit
no shutdown
exit
...