Alcatel-Lucent 7750 SR OS - Modifying Service Parameters

Service Management Tasks
Page 1262 7750 SR OS Services Guide
Modifying Service Parameters
• Epipe on page 1262
• VPLS on page 1262
• IES on page 1263
• VPRN on page 1264
Epipe CLI Syntax: config>service#
epipe service-id
sap ccag-ccag-id.{a|b}[.sap-net|.sap-sap]:cc-id
no sap sap-id
shutdown
The following service examples display the command usage to provision CCAG.
Example: config>service# epipe 103
config>service>epipe# sap ccag-1.a:100
config>service>epipe>sap# shutdown
config>service>epipe>sap# exit
config>service>epipe# no sap ccag-1.a:100
config>service>epipe# sap ccag-1.b:200 create
config>service>epipe>sap$ no shutdown
config>service>epipe>sap$ exit
config>service>epipe#
The following output displays the configuration:
A:ALA-48>config>service>epipe# info
----------------------------------------------
sap 3/1/1.1.1 create
exit
sap ccag-1.b:200 create
exit
no shutdown
----------------------------------------------
A:ALA-48>config>service>epipe#
VPLS CLI Syntax: config>service#
vpls service-id [customer customer-id]
sap ccag-ccag-id.{a|b}[.sap-net|.sap-sap]:cc-id
no sap sap-id
shutdown
Example
: config>service>vpls# sap ccag-1.a:456
config>service>vpls>sap# shutdown
config>service>vpls>sap# exit
config>service>vpls# no sap ccag-1.a:456