Virtual Private Routed Network Services
7750 SR OS Services Guide Page 921
Deleting a VPRN Service
An VPRN service cannot be deleted until SAPs and interfaces are shut down and deleted. If
protocols and/or a spoke-SDP are defined, they must be shut down and removed from the
configuration as well.
Use the following CLI syntax to delete a VPRN service:
CLI Syntax: config>service#
[no] vprn service-id [customer customer-id]
shutdown
[no] interface ip-int-name
shutdown
[no] sap sap-id]
[no] bgp
shutdown
[no] rip
shutdown
[no] spoke-sdp sdp-id
[no] shutdown
Example
: config>service# vprn 1
config>service>vprn# interface "to-cel"
config>service>vprn>if# sap 1/1/10:1
config>service>vprn>if>sap# shutdown
config>service>vprn>if>sap# exit
config>service>vprn>if# no sap 1/1/10:1
config>service>vprn>if# shutdown
config>service>vprn>if# exit
config>service>vprn# no interface "to-cel"
config>service>vprn# bpg
config>service>vprn>bgp# shutdown
config>service>vprn>bgp# exit
config>service>vprn# no bgp
config>service>vprn# rip
config>service>vprn>rip# shutdown
config>service>vprn>rip# exit
config>service>vprn# no rip
config>service>vprn# spoke-sdp 2
config>service>vprn>sdp# shutdown
config>service>vprn>sdp# exit
config>service>vprn# shutdown
config>service>vprn# exit
config>service# no vprn 1
To Next Page
Loading...
