Virtual Private LAN Services
7750 SR OS Services Guide Page 385
Configuring GSMP Parameters
The following parameters must be configured in order for GSMP to function:
• One or more GSMP sessions
• One or more ANCP policies
• For basic subscriber management only, ANCP static maps
• For enhanced subscriber management only, associate subscriber profiles with ANCP
policies.
This example configures a GSMP group.
Example: config>service>vpls# gsmp
config>service>vpls>gsmp>group# description "test group config"
config>service>vpls>gsmp# group "group1" create
config>service>vpls>gsmp>group# ancp
config>service>vpls>gsmp>group# description "test group config"
config>service>vpls>gsmp>group# neighbor 10.10.10.104 create
config>service>vpls>gsmp>group>neighbor# description "neighbor1
config
config>service>vpls>gsmp>group>neighbor# local-address 10.10.10.103
config>service>vpls>gsmp>group>neighbor# no shutdown
config>service>vpls>gsmp>group>neighbor# exit
config>service>vpls>gsmp>group# exit
config>service>vpls>gsmp# no shutdown
This example displays the GSMP group configuration.
A:ALA-48>config>service>vpls>gsmp# info
----------------------------------------------
group "group1" create
description "test group config"
neighbor 10.10.10.104 create
description "neighbor1 config"
local-address 10.10.10.103
no shutdown
exit
no shutdown
exit
no shutdown
----------------------------------------------
A:ALA-48>config>service>vpls>gsmp#
To Next Page
Loading...
