Alcatel-Lucent 7750 SR OS - Creating an Ipipe Service

Virtual Leased Line Services
7750 SR OS Services Guide Page 187
Creating an Ipipe Service
Use the following CLI syntax to create an Ipipe service.
CLI Syntax: config>service# ipipe service-id [customer customer-id] [vpn
vpn-id][vc-switching]
description description-string
no shutdown
The following example displays the command usage to create an Epipe service:
Example:config>service# ipipe 202 customer 1 create
config>service>ipipe$ description “eth_ipipe”
config>service>ipipe# no shutdown
The following example displays the Epipe configuration:
ALA-1>config>service# info
-------------------------------------------
...
ipipe 202 customer 1 create
description "eth_ipipe"
no shutdown
exit
-------------------------------------------
ALA-1>config>service#
Configuring Ipipe SAP Parameters
Configuring ATM to Ethernet local Ipipe example:
Example: config>service# ipipe 202 customer 1 create
config>service>ipipe$ sap 1/1/2:444 create
config>service>ipipe>sap$ description "eth_ipipe"
config>service>ipipe>sap$ ce-address 31.31.31.1
config>service>ipipe>sap$ no shutdown
config>service>ipipe>sap$ exit
config>service>ipipe# sap 1/3/2:445 create
config>service>ipipe>sap$ description "eth_ipipe"
config>service>ipipe>sap$ ce-address 31.31.31.2
config>service>ipipe>sap$ no shutdown
config>service>ipipe>sap$ exit