Mirror Services
7750 SR OS Services Guide Page 1363
Show Commands
mirror
Syntax mirror [application]
Context show>debug
Description Displays mirror configuration and operation information.
Parameters application — Display specified protocol information.
ip, ospf, ospf3, rip, isis, mpls, rsvp, bgp, ldp, mirror, vrrp, frame-relay, igmp, pim, mtrace,
system, filter, subscriber-mgmt, radius
service-using
Syntax service-using [mirror]
Context show>service
Description Displays mirror services.
If no optional parameters are specified, all services defined on the system are displayed.
Parameters mirror — Displays mirror services.
Output Show Service-Using Mirror — The following table describes service-using mirror output fields:
Sample Output
A:ALA-48# show service service-using mirror
===============================================================================
Services [mirror]
===============================================================================
ServiceId Type Adm Opr CustomerId Last Mgmt Change
-------------------------------------------------------------------------------
Label Description
Service Id
The service identifier.
Type
Specifies the service type configured for the service ID.
Adm
The desired state of the service.
Opr
The operating state of the service.
CustomerID
The ID of the customer who owns this service.
Last Mgmt Change
The date and time of the most recent management-initiated change to
this service.
To Next Page
Loading...
