Alcatel-Lucent 7750 SR OS - Deleting an Fpipe Service

Configuring a VLL Service with CLI
Page 216 7750 SR OS Services Guide
Deleting an Fpipe Service
An Fpipe service cannot be deleted until the SAP is shut down. If protocols and/or a spoke-SDP
are defined, they must be shut down and removed from the configuration as well.
Use the following CLI syntax to delete a Fpipe service:
CLI Syntax: config>service#
no fpipe service-id
shutdown
no sap sap-id
shutdown
no spoke-sdp [sdp-id:vc-id]
shutdown
PE router 1 (A:ALA-41):
Example: A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# sap 1/1/1:0/32
A:ALA-41>config>service>fpipe>sap# shutdown
A:ALA-41>config>service>fpipe>sap# exit
A:ALA-41>config>service>fpipe# no sap 1/1/1:0/32
A:ALA-41>config>service>fpipe# spoke-sdp 1:1
A:ALA-41>config>service>fpipe>spoke-sdp# shutdown
A:ALA-41>config>service>fpipe>spoke-sdp# exit
A:ALA-41>config>service>fpipe# no spoke-sdp 1:1
A:ALA-41>config>service>fpipe# shutdown
A:ALA-41>config>service>fpipe# exit
A:ALA-41>config>service# no fpipe 1
PE router 2 (A:ALA-42):
Example: A:ALA-41>config>service# fpipe 1
A:ALA-41>config>service>fpipe# sap 2/1/1.1:16
A:ALA-41>config>service>fpipe>sap# shutdown
A:ALA-41>config>service>fpipe>sap# exit
A:ALA-41>config>service>fpipe# no sap 2/1/1.1:16
A:ALA-41>config>service>fpipe# spoke-sdp 1:1
A:ALA-41>config>service>fpipe>spoke-sdp# shutdown
A:ALA-41>config>service>fpipe>spoke-sdp# exit
A:ALA-41>config>service>fpipe# no spoke-sdp 1:1
A:ALA-41>config>service>fpipe# shutdown
A:ALA-41>config>service>fpipe# exit
A:ALA-41>config>service# no fpipe 1