Alcatel-Lucent 7750 SR OS - Applying an Egress Multicast Group to a VPLS Service SAP

Configuring a VPLS Service with CLI
Page 398 7750 SR OS Services Guide
Applying an Egress Multicast Group to a VPLS Service SAP
Use the following CLI syntax to apply an egress multicast group to a VPLS service SAP:
CLI Syntax: config>service>vpls service-id [customer customer-id] [vpn
vpn-id] [mvpls]
sap sap-id [split-horizon-group group-name]
egress
multicast-group group-name
Example
: config>service# vpls 800
config>service>vpls# sap 1/1/3:100
config>service>vpls>sap# egress
config>service>vpls>sap>egress# multicast-group “vpls-emg-1”
config>service>vpls>sap>egress# exit
config>service>vpls>sap# exit
The following example displays the VPLS configuration with egress multicast group:
A:ALA-48>config>service>vpls# info
----------------------------------------------
description "VPLS with split horizon for DSL"
split-horizon-group "DSL-group1" create
description "Split horizon group for DSL"
exit
stp
shutdown
exit
sap 1/1/4:200 split-horizon-group "DSL-group1" create
description "SAP for residential bridging"
exit
sap 1/1/3:100 split-horizon-group "DSL-group1" create
description "SAP for residential bridging"
egress
multicast-group “vpls-emg-1”
exit
no shutdown
----------------------------------------------
A:ALA-48>config>service>vpls#