Alcatel-Lucent 7750 SR OS - Pseudowire Configuration Notes

Virtual Leased Line Services
7750 SR OS Services Guide Page 193
Pseudowire Configuration Notes
Note that the vc-switching parameter must be specified at the time of the VLL service creation.
Use the following CLI syntax to create pseudowire switching VLL services.
CLI Syntax: config>service# apipe service-id [customer customer-id] [vpn
vpn-id] [vc-type {atm-vcc|atm-sdu|atm-vpc|atm-cell}] [vc-switching]
description description-string
spoke-sdp sdp-id:vc-id
CLI Syntax: config>service# epipe service-id [customer customer-id][vpn
vpn-id][vc-switching]
description description-string
spoke-sdp sdp-id:vc-id
CLI Syntax: config>service# fpipe service-id [customer customer-id][vpn
vpn-id] [vc-type {fr-dlci}] [vc-switching]
description description-string
spoke-sdp sdp-id:vc-id
CLI Syntax: config>service# ipipe service-id [customer customer-id][vpn
vpn-id] [vc-switching]
description description-string
spoke-sdp sdp-id:vc-id
The following displays an example of the command usage to configure VLL pseudowire
switching services:
Example:config>service# apipe 1 customer 1 vpn 1 vc-switching create
config>service>apipe$ description "Default apipe description for
service id 100"
config>service>apipe# spoke-sdp 3:1 create
config>service>apipe>spoke-sdp# exit
config>service>apipe# spoke-sdp 6:200 create
config>service>apipe>spoke-sdp# exit
config>service>apipe# no shutdown
The following example displays configurations for each service:
*A:ALA-48>config>service# info
----------------------------------------------
...
apipe 100 customer 1 vpn 1 vc-switching create
description "Default apipe description for service id 100"
spoke-sdp 3:1 create
exit
spoke-sdp 6:200 create
exit
no shutdown
exit
...