Alcatel-Lucent 7750 SR OS - OAM;SAA List of Commands

OAM/SAA List of Commands
Page 1384 7750 SR OS Services Guide
OAM/SAA List of Commands
Table 44 summarizes the commands and command uses. The command list is organized in the
following task-oriented manner:
• LSP diagnostic commands
• SDP diagnostic commands
• Service diagnostic commands
• VPLS MAC diagnostic commands
• IGMP snooping diagnostic commands
• SAA configuration commands
• VLL diagnostic commands
Table 1: OAM Command Summary
Command Description Page
LSP diagnostic commands
lsp-ping
In-band LSP ping utility to verify LSP connectivity. 1434
lsp-trace
In-band LSP traceroute command to determine the hop-by-hop path for an LSP. 1436
SDP
diagnostic commands
sdp-mtu
Performs in-band MTU Path tests on an SDP to determine the largest path-mtu
supported on an SDP.
1401
sdp-ping
Tests an SDP for in-band uni-directional or round trip connectivity with a round
trip time estimate.
1442
Service diagnostic commands
svc-ping
Tests a service ID for correct and consistent provisioning between two service
end points. The following information can be determined from svc-ping:
• Local and remote service existence
• Local and remote service state
• Local and remote service type correlation
• Local and remote customer association
• Local and remote service-to-SDP bindings and state
• Local and remote ingress and egress service label association
1403