VPRN Services Command Reference
Page 932 7750 SR OS Services Guide
Interface Commands
config 
—service
—vprn
— [no] interface ip-int-name
— [no] active-cpm-protocols
— address ip-address[/mask] [netmask] [broadcast {all-ones | host-ones}]
—no address 
— [no] allow-directed-broadcasts
— [no] arp-populate 
— arp-timeout [seconds]
—no arp-timeout 
— authentication-policy name
—no authentication-policy
— bfd transmit-interval [receive receive-interval] [multiplier multiplier]
—no bfd
— cflowd {acl | interface}
—no cflowd
— description description-string
—no description [description-string]
— dhcp
— description description-string
—no description
— gi-address ip-address [src-ip-addr]
—no gi-address
— lease-populate [nbr-of-leases]
—no lease-populate
— [no] option
— action {replace | drop | keep}
—no action
— circuit-id [ascii-tuple | ifindex | sap-id |vlan-ascii-
tuple]
—no circuit-id
— remote-id [mac | string string]
— [no] vendor-specific-option
—[no] client-mac-address
—[no] sap-id
—[no] service-id
— string text
— no string
—[no] system-id
— proxy-server
— emulated-server ip-address
—no emulated-server
— lease-time [
days days] [hrs hours] [min minutes] [sec 
seconds] [radius-override]
—no lease-time
— [no] shutdown
— server server1 [server2...(up to 8 max)]
—no server
— [no] shutdown
— [no] trusted
— host-connectivity-verify [source {vrrp | interface}] [interval interval] 
[action {remove | alarm}]
— icmp 
— [no] mask-reply