OAM and SAA Command Reference
7750 SR OS Services Guide Page 1395
OAM and SAA Commands
Command Hierarchies
Operational Commands
shutdown
Syntax [no] shutdown
Context config>saa>test
In order to modify an existing test it must first be shut down. When a test is created it will be in
shutdown mode until a no shutdown command is executed.
A shutdown can only be performed if a test is not executing at the time the command is entered.
Use the no form of the command to set the state of the test to operational.
shutdown
Syntax [no] shutdown
Context config>test-oam>ldp-treetrace
Description This command suspends the background process running the LDP ECMP OAM tree discovery and
path probing features. The configuration is not deleted.
Use the no form of the command to enable the background process.
ping
Syntax ping [ip-address | dns-name] [rapid | detail] [ttl time-to-live] [tos type-of-service] [size
bytes] [pattern pattern] [source ip-address | dns-name] [interval seconds] [{next-hop ip-
address} | {interface interface-name} | bypass-routing] [count requests] [do-not-
fragment] [router router-instance] [timeout timeout]
Context <GLOBAL>
Description This command verifies the reachability of a remote host.
To Next Page
Loading...
